Differences

This shows you the differences between two versions of the page.

--- arduino [2023/11/29 09:44] – [Terms] jhagstrand
+++ arduino [2023/11/30 00:58] (current) – [arduino-cli] jhagstrand
@@ Line 8: / Line 8: @@
 Arduino CLI is a command-line version of the same software.
+===== Arduino IDE =====
+File - Preferences - Show verbose output during x compilation x upload
+Check compilation and upload to get detailed messaging and learn:
+  * arduino-builder - the executable run for compile and upload.
+  * the name of the board
+  * the name of the core
+  * the tools and libraries used
+  * the include files used and from which folders
+===== arduino-cli =====
+Display a list of all installed boards, human name and FQBN:
+  $ arduino-cli board listall
+Display current config settings, print out ~/.arduino15/arduino-cli.yaml:
+  $ arduino-cli config dump
@@ Line 21: / Line 41: @@
 Why is my sk8mini no longer compiling?
+When using Tools - Pin Numbering - "By Arduino pin (default)" \\
+function digitalPinToGPIONumber(_pin) is added and compile fails
+When using Tools - Pin Numbering - "By GPIO number (legacy)" \\
+it compiles successfully, but throttle motor does not respond
+My code uses D3 and D6 as pin numbers.
+Where are these defined?
-=== Using Microcontrollers ===
+===== Using Microcontrollers =====
 A microcontroller is a type of integrated circuit (IC), a chip.
@@ Line 150: / Line 179: @@
 ~/.arduino15/packages/esp32/hardware/esp32/2.0.13/boards.txt  - this one has many boards
 ~/.arduino15/packages/arduino/hardware/esp32/2.0.13/boards.txt - this has only the one board
+The CLI needs the FQBN for the board.  Where is that specified?
+I have 5 Nano ESP32 boards installed.  WTF?
+| Arduino Nano        | arduino:avr:nano          |
+| Arduino Nano ESP32  | esp32:esp32:nano_nora     |
+| Arduino Nano ESP32  | arduino:esp32:nano_nora   |
+| Nano32              | esp32:esp32:nano32        |
+| UM NanoS3           | esp32:esp32:nanos3        |